ALCOHOL INKS. (COLOR-WASH™ Metal Stains) in 4 Oz. Twist-Top Cap Dropper Bottle.
More Videos Showing Additional Application Techniques are Coming Soon!
Your Color Choices for the Individual Bottles:
SCARLET RED | LEMON YELLOW | ONYX BLACK | GILDING GOLD | TEMPTING TEAL | GREEN APPLE | SUNLIGHT ORANGE | DARK ROYAL BLUE | TANGERINE BLAST | LATTE’ BROWN | PERSIMMON PURPLE
Also, in the Drop-Down List are: 3 Sizes of CLEAR BLENDING/THINNING SOLUTION (Which Can Also be Used For Clean-up), 2 Sizes of New! Ultra-Clear Polymer Gel, and Pipettes. Several Videos at: STEEL F/X® YouTube Channel for Specialty Finishes.
Bill Says, “If You Can Finger-Paint, You Can Use These Color-Wash™ Stains!”. You can create effects on Any Metal that has been nearly impossible to do… until now.
Color-Wash™ Metal Stains work great on Steel or any metal, including Aluminum or Stainless. Translucent to Semi-Opaque, Vibrant Colors in any color imaginable by combining 2 or more Stains together. The color possibilities are endless. Apply on clean, dry metal or over the patinas for a incredibly unique look.
Easy to apply by brush, sponge, rag or air-brush or over a stencil. Slower drying than the Metal Solvent Dyes & compatible with any clear-coat. Colors can be combined, thinned with the Blending Solution. Colors can be darkened (shaded) with the Onyx Black, which is semi-opaque. Contains No Acids or Acetone.
May be used in conjunction with the Solvent Dyes, but only in the application process after one or the other has been applied, but you shouldn’t mix the STEEL F/X® Metal Solvent Dyes & The Color-Wash™ Stains Together in the Same Container. Approx. Dry Time is 20-30 minutes for the Stains and only a 5-30 Seconds for the Metal Solvent Dyes.
These COLOR-WASH™ Stains will work equally well on ANY Non-Porous Surface. Adding the Stains on top of your patinas will produce gorgeous effects including color, depth, shadows & shading.
These Stains Can be Clear-Coated with any Clear you prefer, including Clear Powder-Coat. Very Easy to Apply & the Results are Beyond Spectacular!~
GEL & STAINS – ART ON METAL.
On the Photo Above, I used a technique called repousse’, which is hammering in some texture on the metal, which was easy, as I was using 26awg. Galvanized Sheet Metal, formed into a rectangular “pan”, with 1-1/2″ Sides. I used a plastic shaping hammer, the head made from HDPE & shaped like a teardrop. I Used a Sand-Filled Leather Pounding Bag, which “gives” as the hammering is done. Only took a few minutes to give the surface some depth & character.
[show-contactus.com-form formkey=”ZjlhMGNmMjI5Nzk,” version=”inline”]