STAINLESS F/X™ is a Very Versatile, Bright Color-Producing Patina for Stainless Steel AND Carbon Steel. It Produces Golds, Greys, Blues, Blue/Violets & Bluish/Black Patina to Blue Gradients on Bare, Polished (Bright) Stainless Steel. No Heating of the Metal or the Patina Product is Required With Any of the STEEL F/X® Patinas & Dyes. Drizzle or Spray on Bare, Polished Stainless Steel For Very Unique, Vivid Patina Colors & Effects. See Photos & Video Below. STAINLESS F/X™ Patina for Stainless Steel is New! STAINLESS F/X™ is Another STEEL F/X® EXCLUSIVE! Developed In-House & Mfg’d Only by STEEL F/X® PATINAS! Not Available In Stores or Through Any Distributors, Steel Yards or Other Metal Suppliers. The STAINLESS F/X™ Kit Includes 1 Each of ‘Stainless Surface Activator’ & STAINLESS F/X™ Patina of Equal Sizes.
Please Note: There are Dozens of Stainless Steel Alloys on the Market. Some Stainless Alloys Are Manufacturer Specific, Proprietary & Very Exotic. For Example, Many Alloys Used in High-Quality Knives or Firearms, While Considered Stainless, May Contain Metals or be of Such Metallurgical Composition That They May Not Be Particularly Responsive to the Patina. This Product Has Only Been Tested on a Few Common Stainless Steel Alloys, e.g. 304, 316, as Well As Several of My Own Knife Blades & Firearms. (Exact Alloy Composition Unknown). Every Alloy Tested as of 03/25/17 Has Responded Very, Very Well. Your Results May Vary, So a Little Trial & Error, Along With Testing in an Inconspicuous Area is Strongly Encouraged.
Also, the STAINLESS F/X™ Surface Activator, Although Completely Odorless, Can Cause Some Discoloration and/or Flash-Rust on Nearby, Exposed Ferrous Steel, Even by Indirect Contact. Always Work in a Well-Ventilated Area, Away From Any Tools or Fixtures Made From Bare Steel, to Dissipate Any Fumes and/or Mist That Would Cause Unwanted Staining or Rusting. Mask or Shield Any Areas or Components of Your Work-Piece That May Be Subject to Rust.
The Patina (STAINLESS F/X™), Itself Does NOT Have This Property, Just the Surface Activator. DO NOT MIX The 2 Products Together In The Same Container. Mixing Won’t Hurt Anything, But it Will Render the Patina Ineffective on Stainless Steel. It Is IMPERATIVE That The Surface Activator Be Applied to the Surface/s of the Stainless Steel Prior to the Application of the STAINLESS F/X™ Patina.
And, the Stainless Steel Surface/s MUST be WET With The Surface Activator Before & During the Application of STAINLESS F/X™ Patina.
Coverage is Approximately 20-30 SQUARE FEET PER 16 OZ. KIT. This Patina Kit Will ALSO Work Beautifully on Mild Carbon Steel, With a Very Similar Color Reaction. When Using on Mild Steel, a Clear-Coat or Sealer is Mandatory, Or It Will Just Turn to Rust.
- Spray (Small, Short Spurts Work Best), or Apply w/ Dropper, Pipette, Sea-Sponge, Clean Rag, Etc.- Rinse Thoroughly & Dry With Clean, Dry Compressed Air. Done!
- Indefinite Shelf-Life! (Store Unused Portion/s in a Cool, Dark Area, Away From Direct Sunlight.
- Contains No Dyes or Pigments.
- Works by Chemical Reaction.
- Pre-Mixed ~ Ready to Use!
- SAFE ~ EASY ~ FAST ~ ODORLESS!
- Beautiful Results ~ Guaranteed!
- No Heat, Flame, Electricity or Tanks Required!
- Very Low Acid Content! Less than 1% in Most Cases. Some STEEL F/X® Patinas and the Dyes & Stains have NO Acid!
- ALL PATINAS & DYES ARE AVAILABLE IN BULK (5 – 275 Gallon Containers) for Heavy Commercial Users. Contact Bill for Information & Pricing. 1-800-710-1273 or email me @ email@example.com
New! STAINLESS F/X™ PATINA – COLOR CASE-HARDENING PATINA for STAINLESS GUNS, KNIVES, ETC
Works on Stainless, Carbon (Mild) Steel, Copper, Brass & Bronze.
NEW! STAINLESS F/X™ ~ STAINLESS STEEL PATINA for COLOR CASE-HARDENING & MULTI-COLORED METAL ART!
STAINLESS F/X™ PATINA – PERFECT FOR COLOR CASE-HARDENING STAINLESS GUNS, KNIVES, ETC
STAINLESS F/X™ ~ AMAZING PATINA COLORING ON STAINLESS STEEL KNIFE BLADE