PPG® DELTRON™ DC3000 ULTRA CLEAR-COAT is a game-changer for my metal art! It’s like giving your artwork a pair of invisible, glossy overalls. With its water-clear topcoat and impressive film thickness, it’s no wonder every body shop and collision center is practically bathing cars and trucks in this stuff daily. Slap on two coats on the front (the back can go with one, but two if you’re feeling fancy), wait 5-6 minutes between coats, and voilà! Your piece will look like it took a swim in a crystal-clear lake.

Get ready to mix it up with each gallon coming with an activator to whip up 5 quarts in total. At an average cost of only 95 cents per square foot, you’re practically stealing it! It’s deep, it’s ultra-clear, and it dries faster than a cheetah on a sprint. With a 1.5-hour pot-life and a film thickness that can go up to a whopping 3.0 mils, those rattle-can clears don’t stand a chance. And let’s sweeten the deal with some freebies: 4:1 quart or pint mixing cups, sticks, and 200-mesh strainers, all disposable. Achieve full-cure status in 8 hours flat, or if you’re in a rush, zap it with a $200 infrared lamp and you’re done in under 10 minutes! Forget those single-stage “rattle-can” clears and water-thin lacquers – they’re not even in the same league. Just remember, this can’t fly by air – UPS Ground is the way to go. Keep it grounded, folks!