GUNSMITH’S SPECIAL™ Color Case-Hardening Patina is Specially Formulated to Work on Extremely Hard, Tight-Grained Alloys e.g. Chrome/Vanadium and Chrome/Molybdenum Steels. Any High-Carbon Alloys Typically Found in Leading Manufacturer’s Firearm Frames and Barrels. Many of Which are Referred to as Stainless, but Not Technically Stainless Steel.
GUNSMITH’S SPECIAL™ Produces Golds, Grays, Blues, Blue/Violets & Bluish/Black AND Even Blue Gradients on Bare, Polished (Bright) Chrome/Vanadium, Chrome/Molybdenum, as Well as Stainless Steels, Mild Steel (Low-Carbon Steel), High-Carbon Steels and Tool Steel Alloys.
No Heating of the Metal or the Patina is Required With This Product or ANY of the STEEL F/X Patinas or Dyes.
Drizzle, Drip, Brush, Dab or Spray (Spritz), on Bare, Polished or at Least Very Clean The Base Metal For Very Unique, Vivid, Multi-Colored Patinas and Effects. (Spritzing or Dabbing With a Small Piece of Natural Sea-Sponge, is my Preferred Method).
See Photos & Video Below. GUNSMITH’S SPECIAL™ Patina for Exotic, High-End Alloys is the Result of Many Years of Research, Development and Literally Hundreds of Failed Tests! Developed In-House & Mfg’d Only by STEEL F/X PATINAS!
Not Available In Stores or Through Any Distributors, Sporting Goods Stores, Catalog Sales, Steel Yards or Other Metal Suppliers.
The GUNSMITH’S SPECIAL™ Kit Includes 1 Each of ‘Surface Activator’ & GUNSMITH’S SPECIAL™ Patina of Equal Sizes.
DO NOT MIX The 2 Liquids Together In The Same Container. Mixing Won’t Hurt Anything, But it Will Render the Patina Almost Completely Ineffective.. It Is IMPERATIVE That The Surface Activator Be Applied to the Surface/s of the Alloy Prior to the Application of the STAINLESS F/X™ Patina and LEFT WET While Applying the GUNSMITH’S SPECIAL™ Case-Hardening Patina.
Coverage is Approximately 20-25 SQUARE FEET PER 16 OZ. KIT. This Patina Kit Will ALSO Work Beautifully on Mild Steel, Low-Carbon Steel, With the Exact Color Reactions Achieved on Proprietary Alloys. When Using on Mild Steel, a Clear-Coat or Sealer is Mandatory, Or It Will Eventually Just Turn to Rust.
Spray (Small, Short, Spritzing Spurts That Emit Droplets Work Best), or Apply w/ Dropper, Pipette, Sea-Sponge, Clean Rag, Etc. Rinse or Wipe Off Thoroughly & Dry With Clean, Dry Compressed Air. Done!
Indefinite Shelf-Life! (Store Unused Portion/s in a Cool, Dark Area, Away From Direct Sunlight).
-
-
- No Fumes ~ Odorless!
- Contains No Dyes or Pigments.
- Will NOT Wipe Off!
- Does Not Affect Tolerances.
- Works by Safe, Fast Chemical Reaction.
- Will NOT Harm the Metal!
- Pre-Mixed ~ Ready to Use!
- SAFE ~ EASY ~ FAST ~ ODORLESS!
- Beautiful Results ~ Guaranteed!
- No Heat, Flame, Electricity or Tanks Required!
-
Very Low Acid Content! Less than .5%. Some STEEL F/X® Patinas and the Dyes & Alcohol Inks Have NO Acid at All!
ALL PATINAS & DYES ARE AVAILABLE IN BULK (5 – 275 Gallon Containers) for Heavy Commercial Users.
Contact Bill for Information & Pricing. 1-800-710-1273 or email me!
Reviews
There are no reviews yet.