TORCH F/X™  Gel Patina for Steel.

Works on Steel ONLY After COPPER F/X™ (Liquid or Gel Versions) Has Been Applied to Clean, Bright, Bare Steel.  Will Not Work on Bare Steel, Stainless Steel or Any Other Metal.

STEEL F/X® Gel Patinas are about the same viscosity as Room-Temperature Honey.  The Gel Patinas allow exact placement of color/s  and by placing a very small amount (1/4 tsp. or so) on the steel, then moving it around with canned air, airbrush, or artist’s brush, ( I just use my finger-tip)…you can create beautiful marbling effects, swirls and random patterns.  

Then, as with all the patinas, rinse (neutralize) with water, dry with clean, oil-free compressed air and either add more patinas or dyes. Rinse again, dry thoroughly & your piece is ready for clear-coating.  (No Rinsing or Neutralizing Required for the Metal Solvent Dyes or Stains).

New Video coming soon…