BLUE HALO™ GEL PATINA
$31.04 – $321.99
BLUE HALO™ Gradient Color Gel Patina.
Now in 5 Sizes! Perfect for Developing a Color Case-Hardened Patina On Carbon Steel. Perfect For Knife Blades or Firearms With No Heat Required! Works on Bare Steel OR Over COPPER F/X™.
BLUE HALO™ GEL is Great for Metal Art or as a “Color Case-Hardened” Patina in Plasticized, Inert Polymer Gel Form For Precise Placement.
The Gel Gives You Exact Placement & Workability. Pre-Mixed, Odorless & Ready-To-Use, Right Out of the Jar. No Heating of the Gel or Metal Required!
Also Great For Any Steel Art Application. Fast, Easy Cold-Process Patina, Like ALL of the STEEL F/X® Patinas for Steel. Perfect for Imparting a Color-Case Hardened Patina on Firearm Parts or Knives. (Note: Will Not Work on Stainless Steel). For Stainless Steel, use STAINLESS F/X™. BLUE HALO™ GEL PATINA for Steel. 2, 4, 8, 16 or 32 Oz. Sizes. BLUE HALO™ Gel Patina Quickly Produces a Myriad of Colors, Including Straw (Yellow/Gold) to Blue & Blue-Violet on Clean, Bright, Bare Steel. Very Versatile Patina & Very Easy to Use!
One 16-Oz. Jar is Enough to do Many Dozens of Plasma-Cut Art Pieces. The 8 Oz. Size Will Do Several Knife Blades or Firearm Receivers or Parts. (Lever Action 1892 Receiver in Photo Below Used Less Than 1 teaspoon of Product). BLUE HALO™ GEL PATINA Will Give Extremely Unique, Multi-Color Marbling and/or Patterning. Can be Used on Bare Steel or Over the Other Patinas For Amazing Special Effects & Customer Dazzling Results.
Bill’s Tip: For Best Results on Firearms, to Get the Color Case-Hardened Patina, Use: COPPER F/X™ GEL, BLUE HALO™ GEL FLAME F/X™ GEL and/or BLUE-BLACK F/X™ GEL. The COPPER F/X™ GEL is Optional. The Other Three Will Give You a Perfect Combination of Color Case-Hardening Colors.
Bill’s Disclaimer: The Above Tip is Based Solely on My Own Personal Preferences. Your Needs and Personal Preferences For Coloration Are Likely Different, (& That’s A Good Thing)!
Mod. 1892 45LC (Rossi) STAINLESS F/X™,
Followed by BLUE HALO™ Gel Patina.
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
| SIZE | 2 OZ., 4 OZ., 8 OZ., 16 OZ., 32 OZ. |
1 review for BLUE HALO™ GEL PATINA
Add a review
You must be logged in to post a review.
You may also like…
STEEL PATINAS
GEL PATINAS
STEEL PATINAS
GEL PATINAS
STEEL PATINAS
STEEL PATINAS
Related products
STEEL PATINAS
STEEL PATINAS
STEEL PATINAS
STEEL PATINAS
STEEL PATINAS
STEEL PATINAS
STEEL PATINAS
STEEL PATINAS
Bill –
Hello Bill,
I have been experimenting with the three solutions I received: FLAME F/X™, BLUE HALO™ and BLUE-BLACK F/X™ (GELS). I am very impressed by them. I am using them to attempt matching the random pattern and tone of color case hardening. I was drawn to your product by the prospect of being able to create the coloration of color case hardening without using a heat treating process (which I also do) I think these products are great for restoring classic firearms that are too valuable to risk by quenching in water during the heat method of case coloring.
Your products are GREAT!! My last attempt on a Q panel exactly matched the coloration of any replica gun from Italy. I only used FLAME F/X™ and and BLUE HALO™. The application technique is critical. I have documented my application technique which follows your guidelines in the E-book. My next phase of experimentation is to apply the same two compounds over a base layer of COPPER F/X™ (like you recommend). While also applying the FLAME F/X™ and BLUE HALO™ (judiciously) over a base layer of french gray. The Idea is to match the coloration found on high end restorations.
These Gel Patinas are easy to use and very fast to use as well. I will also be testing any sealant or rust barrier qualities and abrasion resistance of a full application of these Patinas. I know any finish will wear with abuse (I just want to know how it holds up). I am very intrigued by and pleased with my purchase. I will be ordering again, soon.
If you have any additional tips I would like to know them.
Thank You, Kind Regards
Ray