COPPER VERDE™

$24.99 – $659.99

COPPER VERDE™ is a Verdigris (Greens & Turquoises) Patina For Use ONLY on Pure Copper, Bronze or Brass.

Can Also be Used on Steel That Has Been Prepared With Copper Powder or Copper Infused Acrylic Binder. Complete DIY Kits HERE! COPPER VERDE™ Will Yield a Mosaic, Random Light & Dark Mottled Pattern if Applied to Steel Which Has Been Treated First With COPPER F/X™.

Note Photo Below, Showing BLAZE F/X™ as Another Option for ‘Direct-to-Copper, Brass or Bronze’ Verdigris Patina.

Size

Clear

COPPER VERDE™ is a Verdigris Patina for use on Steel That Has Been Properly Prepared. It Also Works on Pure Copper, Bronze or Brass. It will NOT impart a copper verdigris finish when used directly over COPPER F/X™

If the Intended Use is on Steel, or Any Other Non-Porous Surface, Preparation is Simple: Apply Acrylic Binder (Water-Based Clear-Coat), Containing Pure Copper Powder, When Tacky, Sprinkle on more Copper Powder, Shake off Excess, (Tap Edge of Steel on Your Workbench), then Apply COPPER VERDE™ using a Spray Bottle.

BLAZE F/X™ Patina – Verdigris Effects on Pure Copper

Coverage is Approximately 150-200 Sq. Ft. Per Gallon.

Spray On – Rinse – Done!

Pre-Mixed ~ Ready to Use Patinas & Dyes!

SAFE ~ EASY ~ FAST!

Beautiful Results ~~ Guaranteed!

No Heat, Flame, Electricity or Tanks Required!

On Steel, COPPER VERDE™ Will Yield a Mosaic, Random Light and Dark Patina Pattern if Applied over COPPER F/X™

Copper Verdigris Patina on Steel

Weight	5 lbs
Dimensions	7 × 7 × 14 in
Size	16 oz. Pint w/ Sprayer, 32 Oz – Quart w/ Sprayer, 64 Oz. – 1/2 Gallon, 128 Oz. – 1 Gallon, 2 Gallons, 4 Gallons, 8 Gallons